Collective Mining Expands the Ramp Zone by Drilling its Highest-Grade, Northeasternmost and Deepest Intercept Ever: 58.10 Metres at 21.33 g/t Gold
Hole APC143-D3, which intersected the
Apollo is a large, Partially Reduced Intrusion Related System enriched in gold, silver, copper and tungsten. Drilling to date at Apollo has outlined continuous mineralization from surface to, as of today,more than 1,410 vertical metres. Apollo anchors the Company's flagship Guayabales Project—a district-scale, multi-target and infrastructure-rich project in Caldas,
We are invigorated to accelerate Apollo's transformation into a producing mine as it holds immense promise to become
To watch a video of
Key Highlights
-
High-Grade Intercept at the
Ramp Zone with hole APC143-D3 intersecting:- 27.00 metres @ 43.13 g/t gold and 25 g/t silverwithin a broader mineralized zone of 58.10 metres @ 21.33 g/t gold and 13 g/t silver from 187.80 metres down deflection (1,410 metres below surface).
This hole represents the highest-grade intercept and largest grade accumulation at 1,239 g/t Au (gram x metres) drilled to date in the
-
Significant Expansion of the
Ramp Zone : APC143-D3 is the deepest and northeasternmost hole drilled to date, expanding the dimensions to 300 metres along strike by 100 metres width and 310 metres vertically (previously 275 metres strike by 300 metres vertical). The zone remains open in all directions for further growth. -
New Model for the Ramp Zone Emerges: Ramp zone style of mineralization is located on the margins of the breccia body drilling to date has focused solely along the southeast margin. Significant potential remains to discover additional
Ramp Zone style high-grade mineralization at 1,000 MASL and deeper around the entire outer margin of the funnel-shaped Apollo breccia body. At 750 MASL, the breccia's circumference is approximately 1.6 kilometres. To date, drilling has outlined a 300-metre by 100-metre area along the southeast margin, featuring multiple broad high-grade intercepts of up to 75 metres in length, leaving more than 1.2 kilometres of untested circumference for future drill testing (see Figure 2) -
Aggressive Drilling Ramp-Up: Three deep-capacity diamond rigs are currently operating at the
Ramp Zone , with two additional deep-capacity rigs anticipated to arrive on site in Q1 2026.
To date, Collective has completed 166,500 metres of diamond drilling across the Guayabales and
With
Details (see Table 1-2 and Figures 1-6)
APC143-D3 was drilled as a wedge hole from mother hole APC-143D from Pad 19 in a southerly direction and successfully extended the
-
58.10 metres @ 21.33 g/t gold, 13 g/t silver from 187.80 metres down deflection
including 27.00 metres @ 43.13 g/t gold, 25 g/t silver from 187.80 metres down deflection
APC140-D4 was drilled as a directional hole from mother hole APC-140D from Pad 29 to the southwest and was planned to test the center of the breccia body for
-
15.00 metres @ 5.00 g/t gold, 10 g/t silver from 107.00 metres down deflection at 1,100 MASL interpreted as the transition to
Ramp Zone - 3.65 metres @ 4.91 g/t gold, 6 g/t silver from 547.35 metres down deflection
- 3.35 metres @ 3.51 g/t gold from 648.55 metres down deflection
A key distinguishing feature at Ramp is the significantly higher gold grades encountered to date compared to Marmato Deeps. The Company attributes this superior grade profile primarily to the host rock: mineralization at the
Cautionary Note to Readers:
Although Apollo (including the
Table 1: Assays Results for Drill Holes APC143-D3 and APC140-D4
|
Hole # |
From |
To |
Length |
Au |
Ag |
|
APC143-D3 |
187.80 |
245.90 |
58.10 |
21.33 |
13 |
|
Incl. |
187.80 |
214.80 |
27.00 |
43.13 |
25 |
|
Incl. |
187.80 |
193.75 |
5.95 |
165.72 |
90 |
|
APC140-D4 |
107.00 |
122.00 |
15.00 |
5.00 |
10 |
|
Incl. |
119.00 |
121.05 |
2.05 |
28.87 |
26 |
|
and |
547.35 |
551.00 |
3.65 |
4.91 |
6 |
|
and |
648.55 |
651.90 |
3.35 |
3.51 |
- |
|
True widths have been estimated to be between 85%-98% of the total length with no grade capping applied. Internal dilution of up to 15% below a cutoff grade of 0.30 g/t Au may be included within intervals with the dilution not exceeding 5% continuously within the total interval. |
Table 2: Individual Assays Results from a High-Grade Section of Hole APC143-D3
|
From |
To |
Length |
Au |
Ag |
|
187.80 |
189.00 |
1.20 |
95.30 |
47 |
|
189.00 |
190.30 |
1.30 |
363.00 |
192 |
|
190.30 |
191.35 |
1.05 |
6.29 |
12 |
|
191.35 |
192.60 |
1.25 |
68.90 |
33 |
|
192.60 |
193.75 |
1.15 |
267.00 |
150 |
|
193.75 |
195.50 |
1.75 |
4.31 |
2 |
|
195.50 |
197.00 |
1.50 |
0.26 |
- |
|
197.00 |
198.75 |
1.75 |
0.15 |
- |
|
198.75 |
200.00 |
1.25 |
44.20 |
13 |
|
200.00 |
201.55 |
1.55 |
0.17 |
- |
|
201.55 |
202.70 |
1.15 |
0.46 |
- |
|
202.70 |
203.85 |
1.15 |
0.14 |
1 |
|
203.85 |
204.90 |
1.05 |
1.15 |
2 |
|
204.90 |
206.00 |
1.10 |
0.49 |
1 |
|
206.00 |
207.10 |
1.10 |
2.15 |
1 |
|
207.10 |
208.25 |
1.15 |
10.75 |
11 |
|
208.25 |
209.35 |
1.10 |
18.15 |
17 |
|
209.35 |
210.60 |
1.25 |
0.13 |
3 |
|
210.60 |
212.00 |
1.40 |
0.10 |
1 |
|
212.00 |
213.40 |
1.40 |
22.20 |
23 |
|
213.40 |
214.80 |
1.40 |
33.00 |
26 |
|
Weighted Average |
27.00 |
43.13 |
25 |
|
|
True widths have been estimated to be between 85%-98% of the total length with no grade capping applied. Internal dilution of up to 15% below a cutoff grade of 0.30 g/t Au may be included within intervals with the dilution not exceeding 5% continuously within the total interval. |
About
To see our latest corporate presentation and related information, please visit www.collectivemining.com.
Founded by the team that developed and sold
The Company's flagship project, Guayabales, is anchored by the Apollo system, which hosts the large-scale, bulk-tonnage and high-grade gold-silver-copper-tungsten Apollo system. The Company's objectives at the
Additionally, the Company has launched its largest drilling campaign in history at its optioned
Management, insiders, a strategic investor and close family and friends own 45.3% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on both the NYSE American and TSX under the trading symbol "CNL".
Qualified Person (QP) and NI43-101 Disclosure
David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 ("NI 43-101") and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same.
Technical Information
Samples were cut by Company personnel at
Core samples have been prepared and analyzed at ALS laboratory facilities in
Information Contact:
Follow Executive Chairman
Follow
FORWARD-LOOKING STATEMENTS
This news release contains "forward-looking statements" and "forward-looking information" within the meaning of applicable securities legislation (collectively, "forward-looking statements"). All statements, other than statements of historical fact, are forward-looking statements and are based on expectations, estimates and projections as at the date of this news release. Any statement that involves discussion with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions, future events or performance (often, but not always using phrases such as "plans", "expects", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates", or "believes" or variations (including negative variations) of such words and phrases, or state that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved) are not statements of historical fact and may be forward-looking statements. In this news release, forward-looking statements relate, among other things, to the anticipated advancement of mineral properties or programs; future operations; future recovery metal recovery rates; future growth potential of Collective; and future development plans.
These forward-looking statements, and any assumptions upon which they are based, are made in good faith and reflect our current judgment regarding future events including the direction of our business. Management believes that these assumptions are reasonable. Forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Such factors include, among others: risks related to the speculative nature of the Company's business; the Company's formative stage of development; the Company's financial position; possible variations in mineralization, grade or recovery rates; actual results of current exploration activities; conclusions of future economic evaluations; fluctuations in general macroeconomic conditions; fluctuations in securities markets; fluctuations in spot and forward prices of gold, precious and base metals or certain other commodities; fluctuations in currency markets; change in national and local government, legislation, taxation, controls regulations and political or economic developments; risks and hazards associated with the business of mineral exploration, development and mining (including environmental hazards, industrial accidents, unusual or unexpected formation pressures, cave-ins and flooding); inability to obtain adequate insurance to cover risks and hazards; the presence of laws and regulations that may impose restrictions on mining; employee relations; relationships with and claims by local communities and indigenous populations; availability of increasing costs associated with mining inputs and labour; the speculative nature of mineral exploration and development (including the risks of obtaining necessary licenses, permits and approvals from government authorities); and title to properties, as well as those risk factors discussed or referred to in the annual information form of the Company dated
SOURCE